Categories
Finishing machinery

REGGIANI TERMA STENTER

REGGIANI TERMA STENTER

Ref. FD-1154:

REGGIANI TERMA STENTER, Year 2000, width 3400mm.           N 5 chambers (type big length from 400cm each), gas heating.        Pins chain. Padder not available.                                                           N 2 Bianco weftstraighteners 6 electronic heads.

 

Categories
Finishing machinery

ARTOS BABCOCK STENTER

ARTOS BABCOCK STENTER

Ref. FD-1153:

ARTOS BABCOCK stenter, Year 1985, width 3400 mm, 6 chambers, diathermic oil heating. Chain with clips installed and set of pins as spare parts is available.                                                                    Bianco weftstraightener at the entrance, 6 electronic heads.                Artos Babcock padder 2 cylinders.                                                    Exit cooling system.                                                                                 Perfect condition

Categories
Finishing machinery

SALVADE’ POLIMERIZER

SALVADE’ POLIMERIZER, Year 1981, width 3400mm, working width 3200mm. ITAS burners, fabric capacity about 250m. Speed 50mt

Ref. FD-1152

Categories
Finishing machinery

Lazzati inspection machine

Lazzati inspection machine

LAZZATI mod. Lafra GR/GR. Year 2002.
Rolling inspection machine for greige and finished fabric, nominal width 3600 mm, operating speed 0-80 m/min, electronic meter-counter, feeding from big roll, rolling on big roll or small roll as second choice.

Ref. FD-868

Categories
Finishing machinery

Flainox fabric cord processing

Flainox fabric cord processing

Flainox multifinish jumbo/j 3C
Fabric cord processing machine, 3 channels. Year 2004. Bath preparation and products feeding system. Aspiration and air filtration system.

Ref. FD-867

 

Categories
Finishing machinery

BIANCO Rope Opener

BIANCO Rope Opener with Bianco cutter, YOC 1999, modified and updated in 2014, width 2400mm, working width 2200mm.

Ref. FD-1105

Categories
Finishing machinery

SPEROTTO RIMAR shearing machine, model CALIBRA, YOC 2002

SPEROTTO RIMAR shearing machine, model CALIBRA, YOC 2002

Ref. FD-1104

Categories
Finishing machinery

LA MECCANICA WIDER WIDTH Inspection machine, Type LM 83, YOC 2005, width 5.400-5.600mm

LA MECCANICA Inspection machine, Type LM 83, YOC 2005, width 5.400-5.600mm, working width 5.200-5.400mm.
Entrance, main machine, Tangential exit winding with double cylinder. Electric and electronic systems with Inverter command. Light table. Electronic meters counter with preselection of presettable stop. Motorized packing system.
Max feeding roll diameter 1.500mm. Max weight of giant roll 1.000 – 2.000 kg. Full roll’s diameter 150 – 1.200mm. Weight of the full roll Max 80-100 kg.

Ref. FD-1103

Categories
Finishing machinery

CARU’ Velvet dry brushing machine

CARU’ Velvet dry brushing machine, model C3, YOC 2004, width 2200mm, working width 2000mm
Fabric unwinding unit, Brushing unit, Exit of processed fabric on rolls. Production speed up to 30 m/min, installed power 15,2 kW, compressed air consumption 0,5 NI, Noisiness dB(A) < 70, V 380 – 50 Hz – 3 Ph, Compressed air Min. 4 Bar – Max. 6 Bar.
User’s and maintenance manual available in Italian and in English

Ref. FD-1100

Categories
Finishing machinery

LISA Brushing machine

LISA Brushing machine Type AU 03-02S-01.06, YOC 1997, width 1800mm, working width 1700mm
Composed of:
– Entrance
– LISA abrasive unit
– Winding arm
For dry fabric, any type of fabric
Production speed up to 25m/min
Using and maintenance manual available in Italian and in English

Ref. FD-1099

Categories
Finishing machinery

CORINO Weftstraightener year 2009

CORINO Weftstraightener. Model RADDIZZITRAMA MK2-MG4. Year 2009. Roller width 2.200 mm. 4 Sensors. Motorized Rollers. High Entry with spanders and Dogal system.

BETA Padder completely Stainless Steel. Year 1989. With 3 Rollers. Roller width 2.100 mm. Two troughs for single or double side. CORINO High entry with 2 spanders and Dogal centering system with Fluo. Exit by Folder.

Ref. FD-1030

 

Categories
Finishing machinery

BIANCO Weftstraightener

BIANCO Weftstraightener Model TRAMATEX Pinwheel. Year 1992. Roller width 2000 mm. Brishing system and Dogal centering at entry

Ref. FD-1029

 

Categories
Finishing machinery

MAT ROTORWASH Model ROTORMAT-C2. Year 2001

MAT ROTORWASH Model ROTORMAT-C2. Year 2001. Capacity 300 Kg. 4 Ropes. Rope long 20 to 500 mt. Fabric Speed 30 to 1.000 m/min.

Ref. FD-1028

 

Categories
Finishing machinery

MAT rope washing machine

MAT Washing machine in rope. Model COMBISOFT. Mat. Nº 916. Year 1995.from 2 to 6 ropes. belt speed up to 800 m/min.
centrifugal fan motor for air circulation inside the machine

Ref. FD-1027

 

Categories
Finishing machinery

SPEROTTO RIMAR Continuous Decatizing machine

SPEROTTO RIMAR Continuous Decatizing machine. Mod. MULTIDECAT-2. MD/2. Year 1991. Nº 2433. Roller Width 2.000 mm. Felts width 1.900 mm. Exit by Folder

Ref. FD-1026

 

Categories
Finishing machinery

MAHLO ORTHOMAT, Weftstraightener

MAHLO ORTHOMAT, Weftstraightener Type MFRC-12. Year 2011. 4 Sensors. Roller width 2.000 mm.

Ref. FD-1025

Categories
Finishing machinery

CIMI open width WASHING year 1998, width 2000mm

CIMI Open Width Washing machine. Model LAVANOVA. Type TAV-2000. Year 1998, table width 2000mm. Composed of: High Entry with CORINO Brushing unit. CORINO Centering unit Type K20. Year 1998 with Two spanders rollers and Fluo centerer. Heat exchanger. 1st Box for Washing, Foulard 2 Rollers Pressure2.000 Kg. Fabric Capacity 5 mts and recirculation pump. 2nd Box for Washing, Foulard 2 Rollers. Pressure 7.000 Kg. Fabric capacity 10 mts and recirculation pump. 3rd Box for Washing Foulard 2 Rollers. Pressure 7.000 Kg. Fabric capacity 10 mts and recirculation pump. 4th Box for Treatment Foulard 2 Rollers. Pressure 7.000 Kg. Fabric capacity 35 mts and recirculation pump. 5th Box for Thermal Shock, Foulard 3 Rollers Pressure 15.000 Kg. Fabric capacity 8 mts and recirculation pump. Compensator Unit. Stack of Dryer Cylinders in horizontal form. with CORINO Centering Unit Type CMP40-20D. Nº 192/98. Year 1998. Drums dryers 4 + 4 Teflon Coated, Diameter 800 mm. Flat Belt Transmission. Canopy extration for fumes. Exit by Folder with fast change for 2 trolleys. Minimum speed 5 mt/min, Maximum speed 50 mt/min. Product kitchen with 1 tank of 650 lt. 2 tanks of 90 lts each and 1 tank with mixer capacity 1.400 lt.

Ref. FD-1023

Categories
Finishing machinery

SANTEX SANTASOFT 2-stages TUMBLER year 2008

Santex Santasoft 2-stages tumbler for continuous tension-free processing of knitted fabrics dry finishing machine. Table width 2000mm. Year 2008. The layout and design of the open-width finishing system is described together with the step-wise operation. The continuous treatment design offers the advantages of less crease and rope marks, normal processing in dry conditions, controllable and repeatable conditions in each zone and excellent productivity and yield. Included TMT padder.

Ref. FD-1024

 

Categories
Finishing machinery

BABCOCK washing & bleaching range year 1995

BABCOCK WASHING AND BLEACHING RANGE, YEAR 1995,
Model 5800, width 2000mm, composed as follows:
– N 3 pre-washing tanks with 3 squeezing padders, capacity 20 to 30 meters each; – N 6 bleaching and washing tanks type 5800, capacity 20 to 30 meters each, with 6 squeezing padders;
– N 1 steamer model 5803 with 3 rolls modules capacity 200 meters, with fold relax field (at present not used) with capacity 300-400 meters;
Preparation kitchen with tanks and mixing and dozing boxes. Entrance and exit on folder or big roller. Inverter control

Ref. FD-948